National Insurance, WTD and Pension Rates

Created by Martin Parkinson, Modified on Sun, 2 Jul, 2023 at 3:16 PM by Martin Parkinson

Within the Influence Professional system there are various places where the system can show/calculate NI (National Insurance), WTD (Working Time Directive) and also pension contributions.

It is possible to record rates (%) for each of these elements within the system and these will be used in the calculations.

It should be noted that the NI figures calculated by the system are estimates based on the assumption that workers will be paying NI at the recorded rates. For actual NI contribution figures you would need to consult your payroll system.


Note: After any changes to these rates, users will be required to log out/in before these changes will be picked up.



Contents (Click an Item to Jump to that section)

- Where to Record NI, WTD & Pension Rates

- Where are they used?

a) Temp Vacancies

b) Calculator Icon

c) Timesheet Entry

d) Client Rates 







Where to Record NI, WTD & Pension Rates

There are a couple of places in the system where you can record these NI/WTD/Pension rates.

i) Maintenance > Setup > Parameters

Within the system parameters it is possible to setup some overall rates which will be used in the calculation of NI/WTD/Pension.
Select the parameter set called "PAYROLL" then select the tab labelled 'Real'.

Real 11-13 let you set WTD %, NI % and Pension %.

ii) Maintenance > Setup > Currency, NI+WTD Rates

In here you can set rates for NI, WTD and Pension.
If you have setup any rates using the Parameters (Above) they will be pulled-in to here and set with no DATE. You can add additional rates with an effective from date if any of these rates change in the future.   (See below)

Back to top






Where are they used?

These rates are used in calculations in a few places within the system. Some of the common places are listed below.


a) On the RATES section of TEMP vacancies

At the top right of a TEMP vacancy the system will display rates and show the NI/WTD values. (See below)

(On older systems the RATES are displayed slightly differently)

The newer RATES system is controlled with Parameter PayrollB, flag(1) and it is possible to convert from the older rates to the newer rates system.




b) From the Calculator icon in the Toolbar

In the Toolbar at the top of the screen is a calculator icon. 
Clicking this opens a calculator which will allow you to calculates Pay Rates, Charge Rates and Margin %, and also display the NI and WTD values as well as the Pension contribution amount. (See below)

Back to top



c) From the Timesheet Entry screen (if using TEMP bookings)

In the Timesheet Entry screen the system displays totals for NI/WTD for the displayed bookings. (See below)


NB: These figures are estimated only and are based on the assumption that relevant workers would be making NI contributions, which may not be the case.
For actual figures you must consult your payroll system. 
NI is estimated for workers who are setup as PAYE; those who are set with a Pay type of Ltd Company or Umbrella will not be included in the estimated figures shown at the top right.



d) From the Rates page of a Client record. 

Within a Client (Company) record it is possible to setup Pay/Charge rates for Roles. This [Rates] tab will display the NI/WTD % for those rates.

NB: For older systems user the older (version 1) style rates, it is possible to show the NI/WTD% or to have this hidden.  It is controlled with parameter Payroll, Flag(19)


 (See below)

In the example above you can see the older style of Rates with the NI/WTD shown.


Back to top

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article